Heat Shrink Systems

"

Read More

UC-CSS-230V-AK

  • Magnetic Puck holds Capsules onto the carbon steel fitting for a perfect seal during the shrinking process
  • Magnetic Puck pulls and holds the nut forward on 90° and 45° fittings for easy insertion into the Air Knife.
  • Air knife has heat guard and large 100mm center opening that can be accessed from either side.
  • Seals single or multiple hose or tube assemblies in one pass.
  • Capsules fit and seal hose and tube fittings from 3/8” OD (10mm) through 3” OD (80mm).
  • 230V single-phase AC power at 50/60Hz draws < 5 amps.
  • Customer supplies L6-15 NEMA twist lock receptacle (pertains to North American market only).
  • ON/Off rocker switch illuminates green when “on.”
  • 24/7 operating capacity.
  • Built-in external air filter minimizes heat gun clogging and maintenance, increasing heat gun longevity.
  • Heat side of machine is fully insulated.
  • Durable, long-lasting brushless motor for high-volume production environments.

UC-CSS-120V-AK

  • A Cradle holds and locks the 120V heat gun into place for bench top shrinking of capsules
  • The heat gun can be easily removed from the cradle for remote capsule shrinking.
  • Magnetic Puck holds the Capsule onto the fitting for a perfect seal during the shrinking process.
  • Magnetic Puck pulls the swivel nut forward on 90 and 45 degree fittings for easy insertion into the Air Knife for capsule shrinking.
  • Air knife has heat guard and large 100mm center opening that can be accessed from either side.
  • Can seal single or multiple hose or tube assemblies.
  • Clean Seal Capsules will seal hose or tube fittings from 3/8” OD (10mm) through 3” OD (80mm).

Written by admin